Our measurement systems have been used in the following scientific articles:

Title

Year

Measurement
System
Micromechanical Characterisation of Ni/PU Hybrid Foams
Materials 2020, 13(17), 3746; DOI
Martin Reis, Kristian König, Stefan Diebels, Anne Jung
Applied Mechanics, Saarland University, D-66123 Saarbrücken
2020 Q400
3D-DIC
Influence of Aluminum Surface Treatment on Tensile and Fatigue Behavior of Thermoplastic-Based Hybrid Laminates
Materials 2020, 13(14), 3080; DOI
Selim Mrzljak 1, Maik Trautmann 2, Guntram Wagner 2, Frank Walther 1
1 Department of Materials Test Engineering (WPT), TU Dortmund University, Baroper Str. 303, D-44227 Dortmund, Germany
2 Institute of Material Science and Engineering (IWW), Chemnitz University of Technology, Erfenschlager Str. 73, D-09125 Chemnitz, Germany
2020 Q400
3D-DIC
Experimental investigations on the dynamic behavior of a 2-DOF airfoil in the transitional Re number regime based on digital-image correlation measurements
Journal of Fluids and Structures, Volume 96, July 2020, 103052, DOI
J.N.Wood, M.Breuer, G.De Nayer
Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany
2020 Q400
3D-DIC

Development of an energy-based approach for optimized frequency selection for fatigue testing on polymers – Exemplified on polyamide 6
Polymer Testing
Daniel Hülsbusch 1, Andreas Kohl 1, Patrick Striemann 2, Michael Niedermeier 2, Joachim Strauch 3, Frank Walther 1. DOI
1 Department of Materials Test Engineering (WPT), TU Dortmund University, Dortmund, Germany
2 Laboratory of Material Testing, University of Applied Science Ravensburg-Weingarten, Weingarten, Germany
3 Robert Bosch GmbH, Renningen, Germany

2020 RTSS
Multiscale microsphere modelling of open-cell metal foams enriched by statistical analysis of geometric parameters
Mechanics of Materials 142 (2020): 103295ta Polytechnica - CTU Proceedings 25 (2019), pp. 6-11. DOI
T Bleistein 1, M Reis 1, X Cheng 2, C Redenbach 3, S Diebels 1, A Jung 1.

1 Universität des Saarlandes, Lehrstuhl für Technische Mechanik, Campus A4.2, 66123 Saarbrücken, Germany
2 Fraunhofer-Institut für Techno- und Wirtschaftsmathematik, 67663 Kaiserslautern, Germany
3 Technische Universität Kaiserslautern, Mathematics Department 67663 Kaiserslautern, Germany

2020 Q400
3D-DIC
Model-based analysis of constructional steel structures exemplified by dimensional checking on railway car shells using 3D scanning
Journal of Sensors and Sensor Systems 2020-03-20 | journal-article. DOI
Uwe Jurdeczka
ALSTOM, 38239 Salzgitter
2020 Surphaser
Kinematics of the lumbo–pelvic complex under different loading conditions
Current Directions in Biomedical Engineering, 5/1, 2019, S. 347–349. researchgate
Martin Weidling 1 , Christian Voigt 2 , Toni Wendler 2 , Martin Heilemann 2 , Michael Werner 3 , Jan-Sven Jarvers 4 and Christoph-E. Heyde 4
1 Center for Research on Musculoskeletal Systems (ZESBO), Faculty of Medicine, University of Leipzig, Semmelweisstrasse 14,, Leipzig, Germany
2 Center for Research on Musculoskeletal Systems (ZESBO), Faculty of Medicine, University of Leipzig,, Leipzig, Germany
3 Fraunhofer Institute for Machine Tools and Forming Technology IWU,, Dresden, Germany
4 Department of Orthopaedic, Trauma and Plastic Surgery, University Hospital Leipzig,, Leipzig, Germany
2019 Q400
3D-DIC

Fatigue behaviour of triaxial braided composites under tension-tension and compression-compression loading
Key Engineering Materials (2019), DOI
F. Herrla, H. Rapp.
Institut für Leichtbau ILB, Universität der Bundeswehr München, 85577 Neubiberg

2019 Q400
3D-DIC
Experimental investigations on the fluid-structure interaction of a deformable and membranous hemisphere in turbulent flow
Experimentelle Untersuchungen zur Fluid-Struktur-Interaktion einer deformierbaren Membran-Halbkugel in turbulenter Strömung
Dissertation, Link to the paper
J.N.Wood
Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany
2019 Q400
3D-DIC
Multiaxial failure surface of PVC foams and monitoring of deformation bands by three-dimensional digital image correlation
Journal of the Mechanics and Physics of Solids 130 (2019), pp. 195-215. DOI
F Concas 1 2 , S Diebels 1, A Jung 1

1 Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2 University of Cagliari, Department of Mechanical, Chemical and Materials Engineering, via Marengo 3, Cagliari 09123, Italy

2019 Q400
3D-DIC
Multiaxial investigation of PVC foams and analysis of the deformation mechanism by 3D-DIC
Acta Polytechnica Vol 25 (2019), DOI
F Concas 1 2 , S Diebels 1, A Jung 1

1 Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2 University of Cagliari, Department of Mechanical, Chemical and Materials Engineering, via Marengo 3, Cagliari 09123, Italy

2019 Q400
3D-DIC
Improving DIC Accuracy in Experimental Setups
Advanced Engineering Materials. DOI
M Reis, M Adorna, O Jirousek, A Jung
Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
   

Acromioclavicular joint reconstruction: an additional acromioclavicular cerclage does not improve horizontal stability in double coraco-clavicular tunnel technique
Knee Surgery, Sports Traumatology, Arthroscopy. PUBMED
Theopold J 1, Schöbel T 1, Fischer JP 2, Löffler S 3, Osterhoff G 1, Schleifenbaum S 2, Hepp P 4.
1 Division of Arthroscopy, Joint Surgery and Sport Injuries, Department of Orthopedic, Trauma and Plastic Surgery, University of Leipzig, Liebigstraße 20, 04103, Leipzig, Germany.
2 Zentrum Zur Erforschung der Stütz- und Bewegungsorgane, ZESBO, Semmelweisstrasse 14, 04103, Leipzig, Germany.
3 Institute of Anatomy, University of Leipzig, Liebigstraße 13, 04103, Leipzig, Germany.
4 Division of Arthroscopy, Joint Surgery and Sport Injuries, Department of Orthopedic, Trauma and Plastic Surgery, University of Leipzig, Liebigstraße 20, 04103, Leipzig, Germany.

2019 Q400
3D-DIC

Local quasi-static and cyclic deformation behaviour of brazed AISI 304L/BAu-4 joints characterised by digital image correlation.
Weld World 63 (2019) 501-509. DOI
Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F.
Department of Materials Test Engineering (WPT), TU Dortmund. University, Dortmund, Germany

2019 Q400
3D-DIC
Multi-scale Simulations of Composite Materials
Springer, 2019, Chapter 6, Experimental Studies. Springer
S. Diebels & S. Rjasanow (eds.)
2019 Q400
3D-DIC
Development of a simulation model for the automatic optimization of tools for tube embossing
CIRP Journal of Manufacturing Science and Technology 26 (2019) Pages 50-69, ISSN 1755-5817. DOI
R. Derr, A. Jung, S. Diebels.
Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2019 Q400
3D-DIC

Influence of condensate corrosion on tensile and fatigue properties of brazed stainless steel joints AISI 304L/BNi-2 for automotive exhaust systems.
Materialwissenschaft und Werkstofftechnik 49, 3 (2018) 249-263. DOI
Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F
Department of Materials Test Engineering (WPT), TU Dortmund University, Dortmund, Germany

2018 Q400
3D-DIC
Entwicklung und Realisierung einer Analysemethode zur Bestimmung der hygrischen Dehnfunktion an Kleinstproben
Masterarbeit
Jessica Bernattek
Insitut für Werkstoffe im Bauwesen, Universität Stuttgart, Germany
2018 Q400
2D-DIC
Biomechanical evaluation of hybrid double plate osteosynthesis using a locking plate and an inverted third tubular plate for the treatment of proximal humeral fractures
PLoS One, 13/10, 2018. PLOS
Theopold, J. 1; Schleifenbaum, S. 1; Müller, M. 1; Werner, M. 2; Hammer, N. 3; Josten, C. 1; Hepp, P. 1
1 Department of Orthopedic, Trauma and Plastic Surgery, University of Leipzig, Leipzig, Germany
2 Fraunhofer Institute for Machine Tools and Forming Technology, Dresden, Germany
3 Department of Anatomy, University of Otago, Dunedin, New Zealand
2018 Q400
3D-DIC

Tensile and fatigue assessments of brazed stainless steel joints using digital image correlation.
Fatigue 2018, Matec Web of Conferences 165, 06003 (2018) 1-8. DOI
Schmiedt, A.; Jaquet, S.; Manka, M.; Tillmann, W.; Walther, F.
Department of Materials Test Engineering (WPT), TU Dortmund University, Dortmund, Germany

2018 Q400
3D-DIC
An experimental and constitutive modeling study on the large strain deformation and fracture behavior of PC/ABS blends
Mechanics of Materials 124 (2018) 132–142 DOI
J. Hund, J. Naumann, Th. Seelig
Institute of Mechanics, Karlsruhe Institute of Technology, Karlsruhe 76131, Germany
2018 Q400
2D-DIC
Modellbasierte Analyse von Stahlbau-Strukturen, am Beispiel Maßprüfung und Vollständigkeitsprüfung an Schienenfahrzeug-Wagenkästen mittels 3D-Scan und Software-Algorithmus
Proceedings of 21th. application oriented workshop 3D Northeast at GFaI Berlin Adlershof 2018-12 | conference-paper. ISBN: 9783942709194
Uwe Jurdeczka
ALSTOM, 38239 Salzgitter, Germany
2018 Surphaser

Effect of condensate corrosion on tensile and fatigue properties of brazed AISI 304L stainless steel joints using gold-base filler metal.
Procedia Structural Integrity 13 (2018) 22-27. DOI
Schmiedt, A.; Lingnau, L.; Manka, M.; Tillmann, W.; Walther, F.
Department of Materials Test Engineering (WPT), TU Dortmund University, Dortmund, Germany

2018 Q400
3D-DIC 

Experimental studies on the instantaneous fluid–structure interaction of an air-inflated flexible membrane in turbulent flow
Journal of Fluids and Structures, Volume 80, July 2018, Pages 405-440. sciencedirect
J.N.Wood; M.Breuer; G.De Nayer.
Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany

2018 Q400
3D-DIC  

Numerical studies on the instantaneous fluid–structure interaction of an air-inflated flexible membrane in turbulent flow
Journal of Fluids and Structures, Volume 82, October 2018, Pages 577-609. sciencedirect
G.De Nayer a; A.Apostolatos b; J.N.Wood a; K.U.Bletzinger b; R.Wüchner b; M.Breuer a.
a Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany
b Lehrstuhl für Statik, Technische Universität München, D-80290 München, Germany

 2018  Q400
3D-DIC
Mechanics of soft tissue reactions to textile mesh implants
In: G.M. Artmann, A. Artmann, A.A. Zhubanova, I. Digel (eds.) Biological, Physical and Technical Basics of Cell Engineering, Chap. 11, Springer, Singapore (2018) 251-275. DOI
A. Bhattarai, M. Staat.
Aachen University of Applied Sciences, Institute for Bioengineering, Biomechanics Lab., 52428 Jülich, Germany
2018 Q400
3D-DIC

Investigation of the Fatigue Behaviour of Triaxial Braided Composites for Structural Applications
International Conference on Composite Fatigue ICFC7 (Vicenza, 2018)
F. Herrla, H. Rapp
Institut für Leichtbau ILB, Universität der Bundeswehr München, 85577 Neubiberg, Germany

2018 Q400
3D-DIC

Fluid-Structure Interaction of a Membranous Hemisphere in Turbulent Flow: PIV Measurements of the Flow and DIC Measurements of the Structure
Laser Symposium Lisbon 2019, paper
J.N.Wood; M.Breuer
Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany

 2018 Q400
3D-DIC
Optical strain measurement for the modeling of surgical meshes and their effective porosity.
Current Directions in Biomedical Engineering, 2018;4(1):181-184. DOI
A.J. Horbach, M. Staat
Aachen University of Applied Sciences, Institute for Bioengineering, Biomechanics Lab., 52428 Jülich, Germany
2018 Q400
3D-DIC
Beitrag zur modellbasierten Vollständigkeitsprüfung von Anbauteilen an Stahlbau-Strukturen
Dissertation 2018 ISBN 9783844058017
Uwe Jurdeczka
ALSTOM, 38239 Salzgitter, Germany
2018 Surphaser
Modelling of compressible and orthotropic surgical mesh implants based on optical deformation measurement.
Journal of the Mechanical Behavior of Biomedical Materials, 2017;74:400-410. DOI, PMID
A.J. Horbach, M.T. Duong, M. Staat.
Aachen University of Applied Sciences, Institute for Bioengineering, Biomechanics Lab., 52428 Jülich, Germany
2017 Q400
3D-DIC

Influence of the Processing Parameters on the Fiber-Matrix-Interphase in Short Glass Fiber-Reinforced Thermoplastics
Polymers 2017, 9(6), 221; DOI
Anna Katharina Sambale, Marc Schöneich, Markus Stommel
Chair of Plastics Technology, TU Dortmund University, Leonard-Euler Str. 5, 44227 Dortmund, Germany

2017 Q400
3D-DIC
Life Prediction of Rocket Combustion-Chamber-Type Thermomechanical Fatigue Panels
Journal of Propulsion and Power 2017, DOI
R. G. Thiede and J. R. Riccius 1, S. Reese 2
1 DLR, German Aerospace Center, D-74239 Hardthausen, Germany
2 RWTH Aachen University, 52074 Aachen, Germany
2017 Q400
3D-DIC
Innovativer Hybrid²-Turm für Windenergieanlagen - Entwicklung und Überwachung von Prüfkörpern mit Betondübelverankerung unter dynamischen Einwirkungen
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium - Forschung an Fachhochschulen, TU Kaiserslautern, ISBN: 978-3-00-057249-4
Manuel Koob, Jens Minnert
Institut für Konstruktion und Tragwerk (IKT), Technische Hochschule Mittelhessen, 35390 Gießen, Germany
2017 Q400
3D-DIC
Biomechanical analysis of stiffness and fracture displacement after using PMMA-augmented sacroiliac screw fixation for sacrum fractures
Biomedical Engineering/Biomedizinische Technik, 62/4, 2017, S. 421-428 PUBMED
Höch, A.; Schimpf, R.; Hammer, N.; Schleifenbaum, S.; Werner, M.; Josten, C.; Böhme, J.
Zentrum zur Erforschung der Stütz- und Bewegungsorgane, ZESBO, Semmelweisstrasse 14, 04103, Leipzig, Germany.
2017 Q400
3D-DIC
Mechanical characterization of a short fiber-reinforced polymer at room temperature: experimental setups evaluated by an optical measurement system.
Continuum Mech. Thermodyn. 29, 1093–1111 (2017). DOI
Röhrig, C., Scheffer, T. & Diebels, S.
Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2017 Q400
3D-DIC
Untersuchungen zur Fluid-Struktur-Interaktion einer luftgestützten Halbkugelmembran unter turbulenter ZuströmungStudies on the Fluid-Structure Interaction of a Pressurized Membranous He-misphere in Turbulent Flow
Fachtagung “Experimentelle Strömungsmechanik”, 5. – 7. September 2017, Karlsruhe, Link to the paper
J.N.Wood; M.Breuer.
Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany
2017 Q400
3D-DIC

Plate osteosynthesis of proximal ulna fractures - A biomechanical micromotion analysis.
Journal of Hand Surgery (American Volume), 2017;42(10):834.e1-834.e7. DOI, PMID
Hackl M 1, Mayer K 2, Weber M 2, Staat M 2, van Riet R 3, Burkhart KJ 4, Müller LP 5, Wegmann K 5.
1 Center for Orthopedic and Trauma Surgery, University Medical Center of Cologne, Cologne, Germany; Cologne Center for Musculoskeletal Biomechanics, Medical Faculty, Cologne, Germany; Institute of Anatomy I, University of Cologne, Cologne, Germany.
2 Institute of Bioengineering, Aachen University of Applied Sciences, Jülich, Germany.
3 Department of Orthopedic Surgery, Monica Hospital, Antwerp, Belgium.
4 Department of Shoulder and Elbow Surgery, ARCUS Sportklinik, Pforzheim, Germany.
5 Center for Orthopedic and Trauma Surgery, University Medical Center of Cologne, Cologne, Germany; Cologne Center for Musculoskeletal Biomechanics, Medical Faculty, Cologne, Germany.

2017 Q400
3D-DIC
Experimental characterisation and modelling of the thermomechanical behaviour of foamed rubber
Conference Paper: The 10th European Conference on Constitutive Models for Rubber (ECCMR X) (2017). DOI
H. Seibert, T. Scheffer, S. Diebels
Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2017 Q400
3D-DIC
Multiaxiale, thermomechanische Charakterisierung und Modellierung poröser Elastomere
Dissertation, Universität des Saarlandes (2017). Landesbibliothek
Henning Seibert
Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2017 Q400
3D-DIC
Concept for completeness checking of joined structures exemplified on rail vehicle car body shells
Journal of Sensors and Sensor Systems 2017-01-31 | journal-article
Uwe Jurdeczka
ALSTOM, 38239 Salzgitter, Germany
2017 Surphaser
Komplementäre experimentelle und numerische Untersuchung derStrömung um eine starre und eine flexible Halbkugel in turbulenterStrömung: Teil I: Experimentelle Messungen
Complementary Experimental–Numerical Investigation of the Flow past a Rigidand a Flexible Hemisphere in Turbulent Flow: Part I: Experimental Measurements
Fachtagung “Experimentelle Strömungsmechanik”, 6. – 8. September 2016, Cottbus, Link to the paper
J.N.Wood; M.Breuer
Professur für Strömungsmechanik, Helmut-Schmidt-Universität Hamburg, D-22043 Hamburg, Germany
2016 Q400
3D-DIC
Simulation linearer und nichtlinearer Werkstoffkombinationen in mechatronischen Bauteilen
Antriebstechnik, Heft 6, Juni 2016 link to the paper
Prof. Dr.-Ing. Fister, Michael; Dr.-Ing. Obermann, Patrick
Universität Kassel, Fachgebiet Mechatronik mit dem Schwerpunkt Fahrzeuge, Germany
2016 Q400
3D-DIC
Thermomechanical characterisation of cellular rubber
Continuum Mech. Thermodyn. (2016) DOI
H. Seibert, T. Scheffer, S. Diebels
Saarland University, Applied Mechanics Campus A4.2, Saarbrücken 66123, Germany
2016 Q400
3D-DIC
Acellularization-induced changes in tensile properties are organ specific - An in-vitro mechanical and structural analysis of porcine soft tissues
PLoS One, 11/3, 2016 PLOS
Schleifenbaum, S. 1; Prietzel, T. 1; Aust, G. 2; Boldt, A. 3; Fritsch, S. 4; Keil, I.; 5 Koch, H. 6; Möbius, R.; 7 Scheidt, H. A. 8; Wagner, M. F. 9; Hammer, N.10

1 Affiliation Department of Orthopedic, Trauma and Plastic Surgery, University of Leipzig, Germany
2 Affiliation Department of Surgery, Research Laboratories, University of Leipzig, Germany
3 Affiliation Institute of Clinical Immunology, University of Leipzig, Germany
4 Affiliation Institute of Materials Science and Engineering, Technische Universität Chemnitz, Chemnitz, Germany
5 Affiliations Institute of Materials Science and Engineering, Technische Universität Chemnitz, Chemnitz, Germany, Institute of Anatomy, University of Leipzig, Leipzig, Germany
6 Affiliation Translational Centre for Regenerative Medicine (TRM), Leipzig, Germany
7 Affiliation Institute of Anatomy, University of Leipzig, Leipzig, Germany
8 Affiliation Institute for Medical Physics and Biophysics, University of Leipzig, Leipzig, Germany
9 Affiliation Institute of Materials Science and Engineering, Technische Universität Chemnitz, Chemnitz, Germany
10 Affiliation Department of Anatomy, University of Otago, Dunedin, New Zealand

2016 Q400
3D-DIC
Continuum-micromechanical modeling of distributed crazing in rubber-toughened polymers
European Journal of Mechanics A/Solids 57 (2016) 108e120 sciencedirect
M. Helbig 1
, E. van der Giessen 2, A.H. Clausen 3, Th. Seelig 1
1 Institute of Mechanics, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe, Germany
2 Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
3 Structural Impact Laboratory (SIMLab), Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Rich.
Birkelandsvei 1A, NO-7491 Trondheim, Norway
2016 Q400
2D-DIC
 Optimierung des Systems Netzimplantat-Beckenboden zur therapeutischen Gewebeverstärkung nach der Integraltheorie.
Schlussbericht zu BINGO, Förderkennzeichen: 03FH073PX2, FH Aachen, 2016. DOI, TIB
A. Bhattarai, R. Frotscher, M.T. Dương, M. Staat
FH Aachen University of Applied Sciences, Institut für Bioengineering, Labor Biomechanik, Jülich, Deutschland
2016 Q400
3D-DIC
Femoroplasty: fracture test, optical strain measurement and FE analysis
9. Jahrestagung der Deutschen Gesellschaft für Biomechanik, 06.-08. Mai 2015, Bonn, pp. 8-9. researchgate
B. Ciritsis 1, H.-P. Simmen 1, D. Pérez-Viana 2, A. Ciritsis 3, A. Prescher 3, M. Staat 2
1 UniversitätsSpital Zürich, Klinik für Unfallchirurgie, Zürich, Schweiz
2 FH Aachen University of Applied Sciences, Institut für Bioengineering, Labor Biomechanik, Jülich, Deutschland
3 University Hospital RWTH Aachen, Aachen, Deutschland
2015 Q400
3D-DIC
Bruchmechanische Experimente an Kunststoffen unter optischer Verformungsanalyse mittels digitaler Bildkorrelation
Johanna Naumann
Institute of Mechanics, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe, Germany
2015 Q400
2D-DIC
Characterizing the Mechanical and Electrochemical Behavior of Preloaded Electrodes in Lithium Ion Pouch Cells
ECS Transactions 69 (32) (2015) 9-27, DOI
Shi, L.; Kunz, U.
Clausthal University of Technology
2015 Q400
3D-DIC
Experimentelle Charakterisierung thermoplastischer Kunststoffe bei großen Deformationen
Diplomarbeit
Matthias Kotlik
Institute of Mechanics, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe, Germany
2011 Q400
2D-DIC