[3D Digitisation]

Applications with the Surphaser.

360° Scan of car interiour

The complete interiour of a car is completely digitized with the Surphaser in 5 minutes.

The image shows the 360° image of a single scan of a raw car body (Cubing).

PKW-Innenraumscan mit Surphaser 75 USR

Steam Engine Housing

The housing of a low pressure steam engine (Siemens AG / Mühlheim) is digitised after the molding (before CNC tooling) from inside and outside to realise a dimensional inspection. A sufficient surface coverage is achieved here with 7 scans within 1,5 hours.

To the application report.

LIMESS-Surphaser-Dampfturbinengehäuse

Deformation Measurement of Stone Bridge

The deformation of a stone brodge is measured by comparing the scans of unloaded bridge and loaded state.

To the application report.

Steinbogenbrücke

SurphSLAM- Buildings and Street

Large areas are scanned with the mobile laser scanner SurphSLAM. The scan data is references in realtime during the scanning process.

Architecture and Historical Heritage

Buildings are 3D scanned for document purposes or for modelling.

Factory

Factories are digitised with high precision by using the Surphaser. The low noise point clouds are the base for the modelling and the documentation of e.g. the pipe structure or complete factories.The built in camera give color information to the point cloud.

The video shows a part of a factory, that was scanned with 7 scans.

UK Metro

The undersides of the trains are scanned regularly for inventory and documentation of damages.

Advantages of the Surphaser:

1. Reduction of the scan time from 2 days (with structured light scanner) down to several hours.
2. Reduction of post processing time from 5-6 days to 1 days due to the higher data quality.
3. Due to the large scan range and capability to measure in deep cavities the Surphaser achieved a better surphaser coverage with only a few scans.

The images are property of Simon Stone Mech innovation Limited.

UK Metro underside scaned with Surphaser

UK Metro underside scaned with Surphaser

Helicopter Black Hawk

High resolution scan of nose and tail within 1,5 resp. 1 hour.

Post processing

  • 10 hours for the generation of the 3D surface model form the point cloud.
  • 6 hours for the generation of the CAD model from the scan data.

The images are property of Mabat 3D Technologies Ltd.

Hyundai Elantra

Complete digitisation of inside (90 billions data points) and outside (70 billions data points) of the electric car.
Modell generation (4 hours) for advertisement purposes.

The images are property of Mimic Studios, Inc.

Tidal Energy Turbine Atlantis

Digitisation of the complete turbine for modelling.

  • 15 Scans in 5 hours
  • Post processing and modelling: 8 days. Modelling of the turbine in Inventor 2013

The images are property of Md3D, Digital Surveys and Atlantis Resources Corporation.


 

surphaser atlantis1

 

 

 

 

Boeing 747

Digitasation of the fuselage of the Boeing 747:

12 Scans, 380 Billion data points
• Scan time: 3 hours
• Post processing:
   · 5 h for the generation of the polygon modell
   · 6 h for the generation of the CAD model from the scan data

The images are property of Mabat 3D Technologies Ltd.


Your Application not found ?

Please contact us for

  • further examples
  • a free system demonstration
  • service measurements.

Contact

We look forward to your call !

Tel. +49 2151 36528 00

To the contact form